|Standard Or Nonstandard:||Standard, Standard & Custom||Application:||Industry, Excavator, Pump Hydraulic Machine Rotary Shaft, Bulldozer, Hydraulic Loader|
|Type:||TC TB SB SC TA, Rubber Oil Seal, TC TB TCV TCN DC DB PTFE, Mold Compression, TC/TB/TA/SC/SB/SA Etc||Sample:||Available, Freight Collect, Provide Free Samples, Within 5 Days, Free|
|Temperature:||-60℃~350℃, --60 ~350, -40 ~+260 C, 40~260, -35~+80°c||Certification:||IATF 16949: 2016 , ISO 9001:2008|
high pressure oil seal,
rear wheel oil seal
Yutong rear wheel Oil Seal 180x210x22,half rubber half steel,2 layers180*210*22 high quality compitive price,NBR
(1) Recommended oil seal installation tools and methods
1. The installation of the oil seal can be flush with the front end of the casing aperture, or it can be close to the low section of the casing aperture.
2. The reference planes for installation and positioning should be machined surfaces, and the unprocessed reference planes cannot be used.
3. The outer diameter of the oil seal should be coated with a layer of lubricant.
4, using hydraulic or pneumatic uniform pressure compression oil seal.
Note: The matching surface of the oil package is flush with the reference surface of the housing to ensure the verticality of the shaft and the center of the shaft after the shaft is installed, so that the oil seal lip becomes a line contact belt on the shaft surface to achieve a good sealing effect.
(2) Installation without oil seal
1.Apply a layer of suitable lubricant when the outer diameter of the oil seal is assembled
2. Tap the oil seal firmly and evenly.
3. Check that the oil package is flush with the reference surface of the casing after it is inserted.
Check that the oil seal spring must not come off.
wrong assembly methods and improvement measures:
a. The hammer directly strikes the oil seal.
b. No oil seal is forcibly assembled on the reference surface.
c. Oil seal tooling is unreasonable.
a. The oil seal is deformed.
b, outer diameter of oil seal and dust lip, scratch
c. Oil seal and skeleton degumming.
d. The oil seal spring comes off.
e. The main lip of the oil seal is deformed.
1:Date of Delivery
a. 4-7days if goods in stock.
b. 10-15 days if goods out of stock with molding.
c. 25-30 days if goods out of stock without molding.
d. deoends on order quantity.
2:Can you produce according to the samples?
a. We have our own brand"Tebiete",Haiao" and "LIkeduo".
b. We accept ODM and OEM at the same time.We have the ability to provide the sample of the products of decomposition, develop the mould for customeized.
3: How do you make our business long-term and good relationship?
a. We will continue to improve the process control, and improve the quality of our products and work to reduce operating costs and provide a competitive price for customers, to ensure that customers benefit
b. We seriously treat every customer, in good faith with them to do business, make friends, no matter how much volume, we will provide a full range of services, one-stop sealed solution.
Contact Person: Amy