Mitsubishi/Hino/Dongfeng Truck Rear Wheel Oil Seal 153*175*13mm . TB type,OEM:31N-04080

Product Name:

Dongfegn truck rear wheel oil seal153*175*13,Hini/ Mitsubishi rear wheel oil seal153x175x13 surface steel,

OEM:31N-04080

Material:

NBR material. TB type

Description:

Advantags of NBR:

A. Great resistance to oil~100℃

B.High strengthen (the special formula can reach higher than 20MPa)

C.High tensile

D.Good resistance to water

Installation method:

(1) Recommended oil seal installation tools and methods

1. The installation of the oil seal can be flush with the front end of the casing aperture, or it can be close to the low section of           the casing aperture.

2. The reference planes for installation and positioning should be machined surfaces, and the unprocessed reference planes          cannot be used.

3. The outer diameter of the oil seal should be coated with a layer of lubricant.

4, using hydraulic or pneumatic uniform pressure compression oil seal.

Note: The matching surface of the oil package is flush with the reference surface of the housing to ensure the verticality of the              shaft and the center of the shaft after the shaft is installed, so that the oil seal lip becomes a line contact belt on the shaft             surface to achieve a good sealing effect.

(2) Installation without oil seal

1.Apply a layer of suitable lubricant when the outer diameter of the oil seal is assembled

2. Tap the oil seal firmly and evenly.

3. Check that the oil package is flush with the reference surface of the casing after it is inserted.

    Check that the oil seal spring must not come off.