|
Product Details:
|
| Material: | NBR | Size: | Standard |
|---|---|---|---|
| Hardness: | 30-90 Shore | OEM: | OEM Is Welcomed |
| Sample: | Freight Collect | Standard: | Standard, Customized |
| High Light: | high pressure oil seal,rear wheel oil seal |
||
Product Name:
Benz Shaft Oil Seal75*95*20mm. 2 layers.NBR Rubber Oil Seal , Drive Shaft Oil Seal Abrasion Resistant Feature
Material : NBR
NBR Advantage:
NBR is the wildly used oil resistance compound nowadays. It has a great resistance to wear. The –CN contains in Acrylonitrile can affect physical characteristics other than oil resistance. The higher the Acrylonitrile content, the better the resistance to oil. However, the lower the acrylonitrile content, the better the resistance to low temperature. NBR is used at temperature between -25°C~100°C. The life time of rubber will shorten when temperature exceeds 100°C.
Introduction:
| Product Name | 75*95*20mm Benz shaft oil seal |
| Materials | NBR, HNBR, EPDM, SILICONE, , FLS, FFPM, PTFE |
| Temperature |
NBR(-40~120°C),FFKM(-20~320°C) (-20~200°C),Silicone (-70~220°C) EPDM(-50~150°C),PU(-40~90°C) |
| Feature | Resistance to high pressure, oil, weather, abrasion, solvent, high temperature, abrasion resistant, aging resistant, insulation, acid and alkaline resistant |
| Certification | ISO 9001:2008 |
| Hardness | 30-90 shores A |
| Color | Red,Black,White, blue, green,Clear,etc |
| Size | Any size, Customized/standard and nonstandard |
| Sample Time | If in stock, within 3 days after payment |
| Delivery Time |
10-20 days by shipping after final payment |
| Shipping | By Ships |
| Customized | OEM & ODM are welcomed |
| Packing | Plastic bag&carton box or according to your requirements |
| Certification | IATF 16949: 2016 |
Notes for crankshaft oil seal installation:
1. Before installing the oil seal, be sure to wipe the crankshaft flange surface and oil seal mounting hole with cleaning liquid or cotton cloth dipped in soapy water, and then wipe it with dry cotton cloth; Oil seal hole cleaning fluid and oil did not wipe clean assembly after the oil seal, after the oil seal will cause secondary oil leakage;
2. Before installation, check whether the oil seal spring is installed in place and the main lip is flanged and scratched;
Contact Person: Miss. Amy
Tel: 0086 15093381749
Fax: 86-319-4229166
