|
Product Details:
|
| Structure: | Labyrinth | Material: | NBR Or Customized |
|---|---|---|---|
| OEM: | 3104081ZM0A | Apply: | Conmet |
| Temperature: | -40℃---+300℃ | Color: | Brown Or Depends On Requirments |
| Packaging: | Plastic Bage+ Carton Box | ||
| High Light: | Conmet Bridge Inner Shaft Oil Seal,3104081ZM0A Oil Seal,Rotary Shaft Oil Seal |
||
Product Name:
Quality Spare Parts fits Conmet Bridge Inner Rotary Shaft Oil Seal 125.5*172*14mm
OEM No.:3104081ZM0A
Material: NBR or Customized
Material: NBR or Customized
Technical Data:
| Product Name | Rear Wheel Oil Seal |
| Materials | NBR, HNBR, EPDM, SILICONE, VITON, FLS, FFPM, PTFE |
| Size | 125.5*172*14 |
| OEM | 3104081-Zm01A |
| Temperature |
NBR(-40~120°C), FFKM(-20~320°C), Viton(-20~200°C), Silicone (-70~220°C), EPDM(-50~150°C), PU(-40~90°C), |
| Feature | Resistance to high pressure, oil, weather, abrasion, solvent, high temperature, abrasion resistant, aging resistant, insulation, acid and alkaline resistant |
| Certification |
IATF16949:2016 ISO 9001:2008 SGS quality testing report |
| Hardness | 30-90 shores A (depends on inquire) |
| Color | Brown or Customized |
| Sample Time | If in stock, within 3 days after payment |
| Delivery Time | 10-20 days by shipping after final payment |
| Shipping | By Ships,By Air |
| Customized | OEM & ODM are welcomed |
| Packing | Plastic bag&carton box or according to your requirements |
| MATERIAL | TEMP | ADANTAGES | LIMITATION |
|
Nitrile Rubbrt (NBR) |
-40~125℃ |
■Good oil and fuel resistance ■High tensile strength ■Low swelling in water |
■Poor weather and ozine resistance ■Poor resistance against polar lkuids ■Poor resistance against clhydrocarbon ■Poor resistance against aromatic fluids |
|
Fluorinated Rubber (FKM) |
-20~250℃ |
■The resistance against oil and fuels is better than other types ■The only highly elastic rubber whice is resistance to aromatci and chlornated hydrocarbons ■Exccllcent hcat resistance ■Exccllcent weather and ozonc resistance ■Exccllcent acid resistance ■Low swelling in water |
■Limited cold flexibliity ■Limited tensile and tear strength ■Limited wear resistance ■High compression set in hot water ■Poor resistance to polaric solvents |
|
Polyacrylate Rubber (ACM) |
-25~150℃ |
■Good oil and fuels resistance ■Good weater and ozone resistance |
■Not usable in contact with water and water solutions ■Limited cold flexibility ■Limited tensile strength and tear resistance ■Poor wear reisistance ■Poor resistance against polar and aromatic and chlorinared hydrocarhons |
|
Silicone Rubber (VQM) |
-60~225℃ | ■Best heat resistance of all rubber types ■Excellent low temp resistance of all rubber types ■Excellent weather and ozone resistance |
■Poor tensile and tear strength ■Poor wear resistance ■Sensitive to hydrolysis ■Poor resistance against aromatic oils and oxidized mineral oils ■Poor diffusion resistance |
| OIL-SEALS | |||
| Piston seal | SPGW SPGO SPG SPGA NCF ODI OSI OUIS OHM OKH | Wiper Seal | DKB DKBI DKBI3 DKBZ DKI , DWI DKH DWIR DSI LBI LBH VAY |
| Rod Seal | IDI IUH ISI IUIS SPNO IUY | Wearing Ring | WR KZT RYT |
| U Seal | UPI UPH USH USI UNI V99F V96H | Rotary Seal | ROI SPN CSI VAY |
| Buff Seal | HBTS HBY HBTTS | Back Up Ring | N4W BRT-PTFE BRT-NYLON BRT2 BRT3 BRT-G BRT-P BRN2 BRN3 |
| CENTER JIONT KIT | GEAR PUMP SEAL KIT | O Ring | Oring Kit P series G series AS series S series M 1.5 series M 2.0 series M 1.9series M 2.4 series M 3.0 series M4.0 series |
FAQ:
Q1: Are you trading company or manufacturer?
A:We are trading company and we also have our own factory to produce seals.With more than 20 years of PU manufacturing experience.
Q2: Can I get some samples?
A: Yes, Sample order is available for quality check and market test .But you have to pay the express cost.
Q3: What’s delivery time?
A: It usually takes about 1-2 working days for small order and 10-15 days for big order.
Q4: Can I mix different power in one container?
A: Yes ,Different models can be mixed up in one container,even one order.
Q5: If I only know the excavator model, but can not offer parts No., what should I do ?
A. If possible, you can send us pictures of old products, nameplate or the size for reference.
Contact Person: Amy
Tel: +8615093381749
