Product Details:
|
SIZE: | 80x100x18 | APPLICATION: | IVECO Truck |
---|---|---|---|
Temperature: | -40℃-+260℃(depends On Material) | Rubber Origin: | TAIWAN Changhong |
Warrenty: | 1 Year | Material: | NBR |
High Light: | 80x100x18mm Gearbox Oil Seal,FKM Oil Seal For IVECO Truck,80x100x18mm FKM Oil Seal |
Product Name:
Gearbox Oil Seal 80x100x18mm ,Double Seal Lips FKM Oil Seal for IVECO Truck
Oil Seal Stucture:
Product Name |
Gearbox Oil Seal |
Size |
80x100x189 |
Truck Model |
IVECO |
Material |
NBR or Depends on inquire |
Color |
Brown or Depends on inquire |
Temperature Resistant |
-40℃—+260℃ |
Quality Certification |
IATF16949:2016 & ISO9001:2008 |
MOQ |
1 pcs can be accept if have stock 50pc can be accept if have mold without stock 500-1000pcs if don't have mold |
Customized |
OEM & ODM are welcome |
Package |
Inner plastic bag + Outer carton box |
Type |
Code No |
Feature |
Use |
Common single lip |
B |
It is generally used for sealing medium such as mineral oil and water with high and low speed rotating shaft and reciprocating motion. |
Ordinary oil seal, used in the case of less dust and impurities, resistance to medium pressure < 0.05Mpa occasions, the highest line speed of 15m/s, reciprocating speed <0.1m/s. |
Normal double lips |
FB
|
In addition to the use characteristics of the S type oil seal, it can also be dustproof. |
Common oil seal, with dustproof lip can be dustproof, resistance to medium pressure <0.05
In the case of MPA, the linear velocity is less than 15m/s. |
No spring type |
BV |
Spring-less single lip type inner-wrapped skeleton rubber oil seal. |
Generally suitable for low speed working conditions, the sealing medium is lubricating ester. Linear velocity is less than or equal to 6m/s. |
Outer skeleton unillipped |
W |
Single lip with spring outer skeleton type rubber oil seal, thin waist, good followability, good rigidity. |
Ordinary oil seal, used in the case of less dust and impurities, resistance to medium pressure <0.05MPa occasions. Rotating shaft linear velocity ≤15m/s. |
Exoskeleton bilabial |
FW |
The double lip shell type rubber oil seal with a pair of lips, thin waist, good followability, high stiffness and good coaxiality. |
Common oil seal, with dustproof lip can be dustproof, resistance to medium pressure <0.05 MPA occasions. The speed of 15 m/s or less. |
Assembled single lip |
Z |
The outer frame oil seal is made by the inner and outer frame assembly and piping, and has the characteristics of high installation accuracy, fast heat dissipation and heavy load. |
Applicable to high temperature, high speed conditions under heavy load conditions, medium pressure ≤ 0.05Mpa, the highest line speed ≤15m/s. |
Assembled double lip |
FZ |
The assembled outer frame oil seal with auxiliary lip has the characteristics of dustproof, high installation precision, fast heat dissipation and heavy load. |
Suitable for high temperature, high speed, heavy load conditions under dust conditions, medium pressure ≤ 0.05Mpa, the highest line speed ≤15m/s. |
Unidirectional reflux type |
Right-handed SR,
Left-handed DL |
The oblique bars with an Angle are measured in the air of the lip. Using the principle of fluid mechanics, the one-way pumping action is produced and the backflow effect is obtained. |
It is related to the direction of rotation of the shaft. Because of the reflux effect, the radial force is smaller than the ordinary oil seal, which reduces the wear and heat generation and improves the service life. It is suitable for the occasion of medium pressure < 0.05Mpa and the speed is less than or equal to 20m/s. |
Compression type |
NY |
Lips short, waist short and thick, with pressure resistance, working pressure ≤ 3Mpa. |
Suitable for medium pressure ≤ 3Mpa occasions, suitable for high pressure pump shaft end oil seal, under normal circumstances PV value ≤8. Rotating shaft linear speed ≤15m/s. |
Performance of Raw Material:
NBR |
Excellent resistant to oil, Low temperature resistant,widely used in industrial area
|
EPDM |
Excellent resistance to weather and ozone, good resistance to heat, low temperature and chemical
|
NR |
High elasticity, good chemical strength
|
CR |
Generally good resistance to ozone, aging ,and chemical, good mechanical properties over a wide temperature range
|
SBR |
Shock resistance,performance well in adhesion and sealing
|
SILICONE |
Widest operating temperature range, performance stably in high and low temperature,widely use in food sealing area
|
VT/FKM |
Excellent resistance to high temperature and a broad range of chemical, permeability and compression set are excellent
|
HNBR |
Thermal stability and oxidation resistance
|
IIR |
Low permeability rate and good electrical properties
|
Production Advantage:
---We have passed the IATF16949:2016 quality management certification and have qualified environmental inspection procedures and equipment;.
---We have the Advanced production equipment and process to provide you with high quality and low price products and services
Technology Advantage:
--- Introducing high-tech production line of automated production lines and specializing in the development and production of various rubber products, we also invite rubber experts to research new technology, new formula of "drive belt" and "oil seal" and other rubber products to make our products anti-aging, wear-resistant and advanced level of resistance to high and low temperatures.
Team Advantage:
---In Tebiete, teamwork is critical from production, sales to services. Small teams in each department will gather strength to drive the development of the entire company.
FAQ:
Q : When can I get the price?
A : We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us by E-mail,so that we will regard your inquiry as the first priority.
Q : How can I get a sample to check your quality?
A :After price confirmation, you can require for samples to check our quality.
Q : Can you do the design for us?
A :Yes. We have a professional team with rich experience in packaging box design and manufacturing. We can manufacture the products as per your requirements.
Q : How long can I expect to get the sample?
A :It will be ready for delivery in 7-10 days. The samples will be sent to you via express and arrive in 3-5 days.
Q : What about the lead time for mass production?
A :Usually 30-45 days after you confirm the PP sample and we received your deposit.
Contact Person: Amy
Tel: +8615093381749